Used Machines
>
Presses
>
SMG 800 cnc transfer press, used
| Transfer press, hydraulical | |
| Manufacturer | SMG |
| Model | SMG 800 |
| Year of manufacture | 1994 |
| Comment | good condition |
| |
|
| Technical Details | |
| Press forces | |
| total pressure (max. ram force) |
8000 kN |
| plunger force in step mode |
5000 kN |
| ram retraction force |
1660 kN |
| off-center load from left to rigth |
max. 2500 kNm |
| off-center load from front to back |
max. 600 kNm |
| Pestle | |
| Ram | 800 mm |
| Stroke limitation (adjustment) |
400 mm |
| Damping stroke (hydraulic damping) | 15 mm |
| Distance table-top plunger |
1800 mm |
| Distance table to slide down |
1000 mm |
| Toll spacing (5 levels) | 900 mm |
| Ram size (width x depth) | 4000 mm x 2000 mm |
| Clearance between the guides |
4510 mm |
| Table clamping area (width x depth) | 4500 mm x 1650 mm |
| Stand opening (width x depth) | 1850 mm x 1000 mm |
| The smallest effective area of the tool to push / table (per station) |
900 mm |
| Inclination at 2500 kN parallel controlled |
0,25 mm/m |
| Inclination at 2500 kN without parallel control | 0,5 mm/m |
| Rapid speed down |
650 mm/s |
| Rapid speed up | 550 mm/s |
| Working speed up max. | 114 mm/s |
| Working speed at rate load (800 tons) |
57 mm/s |
| Working speed up (with step) |
172 mm/s |
| Speed at rate working load (with step control, 500 tons) |
86 mm/s |
| hydraulic slide ejectors | 5 |
| Plunger ejector stroke | 100 mm |
| Min plunger ejector. | 8 kN |
| Ejector ram max. | 20 kN |
| Dimensions |
|
| Machine bed dimensions LxW | 4500 mm x 1650 mm |
| Ram dimensions LxW | 4000 mm x 2000 mm |
| Clearane between the guides |
4510 mm |
|
Stand opening (width x heigth) |
1850 mm x 1000 mm |
| Smallest effective area of the tool on ram / table (per station) | 900 mm x 1400 mm |
| Inclination at 2500 kN parallel controlled |
0,25 mm/m |
| Inclination at 2500 kN without parallel controlled | 0,5 mm/m |
| Speed bolster |
3,5 m/min |
| Roadway bloster |
4000 mm |
| Toll weigth per driving table |
max. 30 to |
| Shear pivotable about |
+ 10° |
| Number of sliding clamps per level |
4 |
| Clamping force of sliding clamps (hydraulic 250 bar) |
53 kN |
| Stroke of the sliding clamps |
12 mm |
| Clamping edge of the tool surfaces for clamping force of the sliding clamps (hydraulic 250 bar) |
53 kN |
| Stroke of the sliding clamps |
12 mm |
| Clamping edge of the tool surfaces for (hydraulic 250 bar) |
53 kN |
| Stroke of the sliding clamps |
12 mm |
| Clamping edge of the tool surfaces for toll clamping insert |
50 + 1 |
| Delivery time | immediately |
| Price | on request |
Subject to alterations and prior sale.
