Schuler SHC-2500-5.0x2.5 Spotting try out press PR2489, used
details
Spotting try out press | |
Manufacturer | Schuler |
Model | SHC-2500-5.0x2.5 |
spotting force | 2500 to |
Year of manufacture | 2014 |
Comment |
Facility data | |
Place requirement | |
Foundation depth (table flureben) | 5,000 mm |
Press weight with tooling and Ölfülling | ~540 to |
Foundation load | |
Static load | 274 N/cm² |
Static & Dynamic load | 345 N/cm² |
Energy demand | |
Electrical |
~1,100 kVA |
Apparent power | ~830 kVA |
Reactive power | ~360kVA |
Average energy consumption (under production conditions, i.e. In continuous press operation) |
400V 3/PE 50Hz |
Operating voltage | 24VDC |
Control voltage | 230V AC 50Hz |
Voltage for lighting | 230V AC 50Hz |
Allowable voltage fluctuations | +/-10 % |
Compressed air | |
Low pressure network, minimum pressure | 5 bar |
Ölquantity | ~11,000 l |
Kühl water | |
Kühl water requirement (under production conditions, i.e. in the continuous run of the press) |
approx.14 m3/h |
Water inlet temperature | max. 25 °C |
Water outlet temperature | approx.35 °C |
Pressure difference | ca. 2.5 bar |
Technical data press | |
Type | SHC-2500-5.0x2.5 |
Number | 1 |
Pressing rod | |
Pullingö&stroke;el force | 3,750 - 25,000 kN |
Gross pullback force | approx. 1,750 kN |
Draw ram stroke | 1.700 mm |
Drawing height (width x depth) | 5,000 X 2,500 mm |
Number of cylinders | 3 pcs |
Tool installation space | |
Distance table stö&aerospace;el OT | 2,300 mm |
Distance table-stö&aerospace;el UT | 600 mm |
Table clamping area (width x depth) | 5,000 X 2,500 mm |
T-slot pitch | 300 mm |
Öffnung zwischen den Führungen | 5,040 mm |
Press static | |
Allowable deflection at 2/3 surface load, related to the table length (l. - r.) | |
Table top max. | 0, 125 mm/m |
Stö&Area;el max. | 0, 125 mm/m |
Length of drawing rod, approx. | 2,500 mm |
Max. external moment | |
Left - Right | 1.870 kNm |
Front - Rear | 935 kNm |
Hydraulic 8-point table cushion | |
Displacement force | 900-6,000 kN |
Number of separately adjustable pressure points | 8 pcs |
Ejector force (net, fixed) | 500 kN |
Table cushion stroke total | 380 mm |
Table cushion useful stroke | 350 mm |
Table cushion area (width x depth) (referred to centre of first rows of push pins) | 4,200 X 2,100 mm |
Ejector speed | 100 mm/s |
Pen matrix | 29 X 15 pcs |
Printing pin pitch | 150 mm |
Pin diameter | 45 mm |
Hydraulic cushion in the rod | |
Displacement force | 450- 3,000 kN |
Ejector force (not adjustable) | 200 kN |
Cushion stroke max | 200 mm |
Cushion area (width x depth) {referring to middle äußfirst pressure pin rows) |
4,200 X 2,100 mm |
Return speed | 100 mm/s |
Pen matrix | 29 x 15 |
Printing pin pitch | 150 mm |
Pin diameter | 45 mm |
Mechanical stroke limitation | |
Number of spindles | 2 pcs |
Position of the spindles | Page spindles |
Stroke limiting force max | 7,500 kN |
Spindle adjustment range | 850 mm |
Effective range over table | 600 - 1,450 mm |
Tool clamp on stand | |
Number | 12 pcs |
Type | Insertion clamp |
Tensioning force | Each 100 kN |
Stroke | 12 mm |
Drive table | |
Number of driving tables | 1 pc |
Direction of extension | to the front |
Travel distance from the press | 3,500 mm |
Travel speed (rapid/creep speed) | 15/2 m/min |
Max. Tool weight | 60 t |
Max. Weight upper tool | 30 t |
Connections for tools | |
Position | Pages |
• Compressed air controlled | 2x½" Piece |
• Compressed air uncontrolled | 2x½" Stück |
• hydraulics controlled | 4 x pcs |
Hydraulic pressure ND | 3 x 50 bar |
Hydraulic pressure HD | 1 x 300 bar |
Ölvolume | 30 l/min |
Nominal size | G½" |
• WZ- control | 1 x H AN 24 pcs |
• Sockets - 230 V / 16A | 2 pcs |
• Sockets - 400 V / 16A | 1 pc |
• Sockets - 400 V / 32A | 1 pcück |
Speeds | |
Rapid lowering speed | 400 mm/s |
Rail return speed Stößel | 400 mm/s |
Working speed V1 max. up to max. ~3,900kN | 265 mm/s |
V2 max. up to max. -6600kN | 132 mm/s |
V3 max up to max -9.3 00kN | 88 mm/s |
V at nominal force (25.000 kN) | 36 mm/s |
Main drive | |
Motor power for main pumps | 3 x200 kW |
Total installed power approx. | approx. 720 kW |
Pump flow max. | 3 X 1,400 l/min |
Maximum hydraulic system pressure | 310 bar |
Press main dimensions | |
Press height over corridor | < 9,500 mm |
Press width at corridor level, approx. | 7 .000 mm |
Press width at headboard level, approx. | 8,800 mm |
Press depth at corridor level, approx. | 3,500 mm |
Press depth at header level, approx. | 5,200 mm |
High fixture area above corridor | 500 mm |
Delivery time | immediately |
Price | on request |
Enquiry
You are interested in our product? Fill in our offer form and we will get back to you as soon as possible!
video consulting
You can't come to us? Via videoconference we can give you optimal advice, clarify your technical questions and respond directly to your wishes.
arrange a video conference ›