Successful Sale of a Used StrikoWestofen MH-T 3000-1500 G-eg Melting and Holding Furnace
FISS successfully sold a used StrikoWestofen MH-T 3000-1500 G-eg. The melting and holding furnace, previously installed in Germany, was professionally dismantled, packaged and loaded for transport by the FISS specialist team.
Which used foundry furnace was successfully sold?
The system sold was a used StrikoWestofen MH-T 3000-1500 G-eg. The equipment combines the melting and holding of aluminium within one furnace system.
Following the sale, FISS handled the professional dismantling, transport-safe packaging and loading of the equipment at its former location in Germany.
From successful sale to secure loading
The handling of a used industrial furnace involves much more than brokerage alone. The equipment must be professionally shut down, dismantled, protected and prepared for transport.
The experienced FISS team coordinated the complete process efficiently and in accordance with high safety standards.
International equipment brokerage
The used StrikoWestofen furnace was successfully brokered to a new operator.
Professional dismantling
Mechanical and electrical components were systematically disconnected and prepared for relocation.
Packaging and secure loading
The furnace components were protected, packaged safely for transport and loaded in a controlled manner.
Melting and holding within one integrated system
The StrikoWestofen MH series was developed for modern aluminium foundries and combines two essential metal-supply tasks within one system.
Controlled melting of aluminium
The furnace prepares the supplied aluminium for the subsequent foundry production process.
- Gentle melting process
- Reduced unnecessary oxidation
- High metal yield
- Continuous metal supply
Consistent temperature conditions
The molten aluminium is maintained at a controlled temperature for further production.
- Precise temperature control
- Consistent melt conditions
- Consistent alloy quality
- Reliable production supply
Continuous foundry operation
By combining both process stages, the furnace can support a consistent production workflow.
- Melting and holding combined
- Reduced process interruptions
- Stable metal supply
- For demanding production conditions
From shutdown to transport-ready equipment
Every work stage was carefully planned so that the furnace could be dismantled and loaded completely, safely and efficiently.
Project planning
The equipment scope and required dismantling work were coordinated before the project began.
Shutdown
The furnace was taken out of operation in a controlled manner and prepared for the technical work.
Dismantling
Mechanical and electrical components were professionally disconnected by experienced technicians.
Packaging
Sensitive assemblies and furnace components were protected and secured for transport.
Loading
The prepared components were loaded onto the designated transport vehicles in a controlled manner.
Why are StrikoWestofen furnaces internationally sought after?
The MH series is known for energy efficiency, high melt quality, process reliability and dependable operation under industrial production conditions.
High energy efficiency
Advanced thermal insulation and heat recovery support economical use of the supplied energy.
High metal yield
Gentle melting conditions with limited oxidation help to reduce metal losses.
Consistent quality
Precise temperature control supports consistent melt and alloy conditions.
Proven reliability
The robust furnace technology is designed for a long industrial service life.
Economical melting through efficient heat utilisation
The energy demand of a melting furnace has a major influence on the ongoing operating costs of an aluminium foundry.
Suitable thermal insulation and the utilisation of available heat can reduce energy consumption and support more economical continuous operation.
Reduced heat loss
The furnace design helps to limit unnecessary energy losses to the surrounding environment.
Use of available process heat
Heat-recovery systems can make existing energy available for reuse within the furnace process.
Economical continuous operation
Efficient energy use supports lower ongoing costs in series production.
Support for sustainable production
Reduced energy consumption can also contribute to lower operational emissions.
Gentle melting for a high aluminium yield
During the melting process, oxidation and contamination can influence the usable quantity of metal and the quality of the melt.
Gentle melting conditions support a high metal yield and consistent quality for the subsequent casting process.
- Gentle melting process
- Reduced unnecessary oxidation
- High usable metal yield
- Consistent melt conditions
- Precise temperature control
- Consistent alloy quality
- Stable supply for foundry production
- Support for high-quality casting results
How was the StrikoWestofen prepared for transport?
The FISS specialist team handled all required work, from controlled shutdown to transport-safe loading.
Professional disassembly
The furnace body, attachments and additional mechanical assemblies were systematically prepared for transport.
Controlled disconnection
Electrical connections and associated components were disconnected by experienced technicians.
Protection of equipment components
The work was carried out efficiently and in accordance with high safety standards.
Secure preparation for onward transport
Following dismantling, all components must be protected against mechanical stress, contamination and unintended movement.
Careful packaging and loading planning provides the basis for safe onward relocation of the equipment.
- Verification of the complete equipment scope
- Protection of sensitive components
- Securing of moving assemblies
- Transport-safe packaging
- Selection of suitable lifting equipment
- Controlled positioning
- Secure loading of the furnace components
- Coordination of onward transport logistics
Why can a used melting furnace be economical?
High-quality foundry furnaces are designed for long periods of industrial operation. A technically suitable used system can therefore be an attractive alternative to new equipment.
Lower acquisition costs
Used branded furnaces can reduce the required investment compared with purchasing a new system.
Shorter project lead times
Equipment that is already available can often be integrated into production planning more quickly.
Furnace technology proven in operation
StrikoWestofen technology was developed for demanding industrial production conditions.
Continued use of existing technology
Reusing high-quality equipment extends its service life and reduces the need for new production.
Equipment sales, dismantling and logistics from one source
FISS specialises in the sale and professional relocation of used foundry equipment.
- Long-standing experience with foundry equipment
- International marketing of used machinery
- Comprehensive project management
- Technical recording of the equipment scope
- Mechanical and electrical dismantling
- Professional packaging
- Secure loading
- Coordination of machine transport
- Relocation of individual furnaces and complete casting cells
- One contact for the complete project
Further offers for used foundry furnaces
Buy used melting furnaces
Available furnace systems for melting and supplying aluminium and other metals.
Foundry furnacesView further used furnaces
Melting furnaces, dosing furnaces, crucible furnaces and additional furnace technology for industrial foundries.
Project serviceDismantling and equipment relocation
Professional dismantling, packaging, loading and coordination of international machine transport.
Questions about the StrikoWestofen MH-T 3000-1500 G-eg
Which foundry furnace was sold?
Where was the furnace located?
What tasks does a melting and holding furnace perform?
What advantages does the StrikoWestofen MH series offer?
Which services were provided by FISS?
Was the electrical dismantling also carried out?
Why is professional packaging important?
Can FISS also relocate complete casting cells?
Are you planning to buy, sell or relocate a used melting furnace?
Send FISS the manufacturer, model, year of manufacture, furnace capacity, metal type, equipment location, technical documentation and available photos. Our team will review the equipment scope and support you with assessment, sale, dismantling, packaging, loading and transport.
Telephone: +49 (0)7181 60696-0 · Email: info@fiss-machines.com
