SW BA W06-22 5-axis double-spindle machining centre BA2409, used
details
| Machining center | Horizontal |
| Manufacturer | SW |
| Model | BA W06-22 |
| Year of manufacture | 2020 |
| Working hours | approx. h |
| Spindle runtime | approx. h |
Technical data
- Control system: Siemens 840 D SL
- Version with 2 independent Z-axes
- Spindle HSK A63 with 80 Nm (2x)
- Speed range 1 • 17,500 rpm
- Power 35 kW
- Torque 80 Nm
- Rated power 26 kW
- Rated torque 60 Nm
Feed drives
- Siemens linear motors, type 1FN3
Technical data:
Axis Rapid traverse Acceleration
- X 100 m/min 12 m/s²
- Y 100 m/min 10 m/s²
- Z 100 m/min 22 m/s²
Tool magazine
- Slide-guided magazine chain
- Pick-up system
- Capacity: 2 × 42 tool positions
- HSK 63
- Fixed-position coded tool management
- Max. tool length 400 mm
- Max. tool weight 10 kg
2xset oil distributors for NC rotary table
- for work areas 1 and 2 (A- and U-axes)
- NW6 - uncontrolled
- sealed to prevent oil leakage
- 10 distributor tracks
- max. hydraulic operating pressure 250 bar
- max. pneumatic operating pressure 8 bar
2 sets of clamping bridge supports
2 sets of preparation for torsional compensation
- Preparation for the hydraulic compensation module for the 4th axis when using torsion-sensitive fixtures, as well as off-centre loads
Hydraulic Clamping Base Module
- Workpiece clamping via hydraulic valves, NG 6, double-acting clamping cylinders
- Pressure regulating valve, max. p=250 bar
- Throttle check valves in A and B
- Clamping pressure monitoring via electronic pressure sensor
- Clamping pressure is maintained in the event of a system failure via unlockable check valves
- To replace the clamping device, the unlockable check valves can be deactivated in groups via the PLC controller.
- 1 clamping circuit in working area 1
- 1 clamping circuit in working area 2
- Inputs and outputs in the PLC controller
2 × 3 Spannkreise additional members per working group
4 x 2-stage pressure changeover, hydraulic
Pneumatic pressure booster
Central coolant equipment
Scraper belt conveyor
(short, broken chips, needle-like chips, castings, casting swarf; no clumps, no mats)
- suitable for chip lengths < 100 mm
- Conveyor width 1000 mm
- Discharge height with hopper 1100 mm
- Waste water filter, slotted screen w = 0.35 mm
- Waste water pump 400 l/min
- Coolant capacity approx. 0.5 m³
1x emulsion mist separator
- Two-stage centrifuge
- Air flow rate 1200 m³/h
Automatic loading door
- open / close, door safety mechanism via contact strip
Tool and Planar System Inspection
Pneumatic tool and planar system inspection. The tool change and cleaning process is repeated three times if the tolerance limit is exceeded. The activation and selection of tolerance levels are tool-specific and carried out via the software HMI.
Position control, basic module
- Pneumatic control system for workpiece support or clamping elements
- Flow measurement
- With integrated free-blow function
- 2 pressure lines each for the A-side and U-side
- Simultaneous measurement on the loading side of
- 2 test lines on the A or U side, as selected
- Detectable gap >/= 0.05 mm
- Convenient diagnostics and adjustment via software HMI
- The measured values are automatically activated by the fixture selection
Additional 19" control panel
for entering data at the magazine loading station
Profinet interface for automation includes:
- Hardware interface via Profinet or PN coupler
- Set-up of the base software
LIFE DATA - SW CloudPlatform CORE
| Delivery time | immediately |
| Price | on request |
Enquiry
video consulting
Manufacturer info
Second-hand SW machine tools – quality and precision for series production
SW Schwäbische Werkzeugmaschinen GmbH is one of the world’s leading manufacturers of horizontal CNC machining centres. The company develops high-performance manufacturing solutions for series production and is particularly well established in the automotive industry, mechanical engineering, aerospace and the supply industry.
If you’re looking to buy a second-hand SW machine tool, Fiss Machines is the right place for you. We regularly offer high-quality second-hand SW machining centres and support companies worldwide in their search for the right CNC machine.
SW models at a glance
Among the best-known machines from SW Schwäbische Werkzeugmaschinen are:
- SW BA 322i – Compact horizontal machining centre with twin spindles for maximum productivity.
- SW BA 342i – High-performance CNC machining centre for cost-effective series production.
- SW BA 444 – Ideal for larger workpieces and demanding machining tasks.
- SW BA W06 – Flexible horizontal machining centre with high dynamic performance.
- SW BA W08 – Robust manufacturing solution for complex workpieces and high production volumes.
- Further SW machining centres and customised designs.
Depending on the year of manufacture and specification, the machines are equipped with modern control systems, pallet changers, dual-spindle technology and extensive automation options.
Advantages of SW machining centres
SW machine tools are renowned worldwide for their superior quality, efficiency and reliability. The key advantages include:
- High productivity thanks to dual-spindle technology
- Short machining and cycle times
- Maximum precision and repeatability
- Robust construction for long-term industrial use
- High process reliability in multi-shift operation
- Flexible automation and pallet handling
- Low maintenance costs and long service life
- Ideal for series production and large-scale manufacturing
These features make SW machines an excellent choice for companies wishing to organise their production economically and efficiently.
Second-hand SW machine tools at Fiss
At Fiss Machines, you’ll regularly find second-hand SW machine tools, SW machining centres and second-hand CNC machines at attractive prices. Our range includes various models and configuration options to meet a wide variety of manufacturing requirements.
Each available machine is presented with its technical specifications, images and equipment features. This gives you a clear overview and enables you to select the right machine for your production.
Are you looking for a specific SW model?
Not every second-hand SW machine tool you are looking for is available at all times. If the model you are looking for – for example, an SW BA 322i, SW BA 342i, SW BA 444, SW BA W06 or SW BA W08 – is not currently in stock, we will be happy to assist you with sourcing it.
Thanks to our international network, we can often source suitable used machines or offer you high-performance alternatives from comparable manufacturers.
Why Fiss?
- Wide selection of used CNC machine tools
- Specialist in used machining centres
- International sourcing of used machines
- Personalised and expert advice
- Support with transport, export and commissioning
- Attractive alternatives if a desired model is unavailable
Fiss is your reliable partner for used SW machine tools, SW machining centres and high-quality used CNC machines. Contact us – together we’ll find the right machine for your production.
