Manufacturer · Wheel blasting machines · Germany
Used AGTOS shot blasting machines Wire mesh belt, roller conveyor, hanger and trough belt
AGTOS, based in Emsdetten, Germany, has built wheel blasting machines with its own turbines since 2001, with manufacturing at its plant in Konin, Poland. The range covers wire mesh belt, roller conveyor, hanger and trough belt machines for castings, structural steel and bulk parts. Following its sale to Japan’s SINTOKOGIO group, the company now trades as Sinto AGTOS GmbH. This page lists the used AGTOS machines currently at FISS, plus the data you need to assess them.
- since 2001Emsdetten and Konin
- BS · RT · HT · MGstandard ranges
- up to 37 kWturbine 4.6
Machine you need not listed? Send FISS a search request
Agtos BS 10-05-02-3.6-04-11 Drahtgurt-Strahlanlage SA2135 (offer SA2135) · Photo: FISS
Knowledge · AGTOS
Buying a used AGTOS machine: conveyor type and turbines come first
With a used AGTOS blast machine, the conveyor system decides which parts you can process: a wire mesh belt for flat castings and laser-cut parts, a roller conveyor for beams and plate, a hanger line for large or awkward workpieces, a trough belt for robust bulk parts. Next come the number and type of turbines and the condition of wear parts, the abrasive circuit and the filter. The type code already tells you the passage size. This overview sorts the ranges using AGTOS data.
01 · Overview
AGTOS at a glance
- Company
- Sinto AGTOS GmbH, formerly AGTOS Gesellschaft für technische Oberflächensysteme mbH
- Headquarters
- Gutenbergstraße 14, Emsdetten (North Rhine-Westphalia); production in Konin, Poland
- Founded
- began trading on 1 October 2001, set up by a group of blasting specialists; first machine delivered in 2003 was a satellite indexing table blast machine
- Ownership
- shares sold with effect from December 2024 to the SINTOKOGIO group (Nagoya, Japan); trade press reports that management and staff stayed on
- Technology
- wheel blasting machines with in-house high-performance turbines, types 3.6 (up to 22 kW) and 4.6 (18.5–37 kW)
- Machine types
- wire mesh belt (BS), roller conveyor (RT), hanger (HT) in batch or continuous form, trough belt (MG), plus drum and custom machines
- Size
- over 170 employees in 2016 according to the company history; machines in use in more than 50 countries
How to read AGTOS type codes
The letters give the conveyor type: BS wire mesh belt, RT roller conveyor, HT hanger, MG trough belt. AGTOS uses the suffix XX-XX for custom machines.
For BS, RT and HT the numbers are the maximum workpiece width and height in decimetres: BS10-05 means 1,000 × 500 mm, HT13-21 means 1,300 × 2,100 mm. For MG the number is the batch volume in litres, e.g. 350 l for the MG350.
Longer codes such as BS 10-05-02-3.6-04-11 appear on the used market. The digits 3.6 match the name of the AGTOS turbine type; AGTOS does not publish what the remaining digits mean, so confirm turbine count and motor power on the rating plate and the motors.
02 · Series
AGTOS machine types: BS, RT, HT and MG
Every AGTOS machine uses blast wheel turbines and a closed abrasive circuit: abrasive is cleaned, metered from the hopper back to the turbines, a fan keeps the cabinet under negative pressure and a filter unit cleans the exhaust air. What differs is how the workpiece moves through the machine. Used machines are listed under shot blasting machines.
Continuous · wire mesh belt
AGTOS BS
600–1,600 mm Workpiece width
- BS06-05
- BS10-05
- BS16-05
- Parts lie on the wire mesh belt and are blasted from above and below at once; workpiece height up to 500 mm, 4 or 8 turbines
- Built for deburring, descaling and cleaning castings and laser-cut parts, with a stated focus on aluminium
- A trigger sill ahead of the entry lock releases abrasive only when parts are in the blast zone; rubber curtains and a blow-off unit at the exit
Seen on the used market as BS 08-04 and BS 10-05, for example
Continuous · roller conveyor
AGTOS RT
500–3,600 mm Workpiece width
- RT10-06
- RT15-10
- RT26-10
- RT32-10
- RT36-06
- Workpiece height 500–1,000 mm, 4, 6 or 8 turbines depending on size
- Used to derust steel beams and descale sections and plate
- Can be linked via cross conveyors to preservation, sawing and drilling
Batch or continuous · hanger
AGTOS HT
500–2,000 kg Hook load
- HT11-13
- HT13-17
- HT17-23
- HT21-30
- Workpiece width 1,100–2,100 mm, height 1,300–3,000 mm, 2 to 4 turbines
- The workpiece rotates through three blasting positions; held on plates, baskets, bars or custom fixtures
- Available as batch, continuous or hybrid lines; the overhead track can link blasting, painting and drying
On continuous lines, record the track and conveyor as part of the machine
Batch · trough belt
AGTOS MG
90–550 l Batch volume
- MG90
- MG180
- MG350
- MG550
- Batch weight 200–1,000 kg, single parts 10–50 kg, 1 turbine (MG90, MG180) or 2 turbines (MG350, MG550)
- The rubber trough belt tumbles parts relatively gently; tight gaps allow very small parts
- For descaling, derusting and deburring robust bulk parts; loaded automatically by skip or semi-automatically
Only for parts that tolerate being blasted together in a batch
Maximum workpiece width of the AGTOS standard ranges
Based on the AGTOS type tables; custom machines (XX-XX) fall outside these ranges. For hanger machines, height up to 3,000 mm matters as well.
03 · Comparison
Wire mesh belt or trough belt: single parts or bulk
| Feature | Wire mesh belt BS | Trough belt MG |
|---|---|---|
| Operation | Wire mesh belt BScontinuous, fits into flow production | Trough belt MGbatch, several machines can be linked |
| Workpieces | Wire mesh belt BSsingle parts up to 500 mm high, e.g. castings and laser-cut parts | Trough belt MGrobust bulk parts up to 50 kg each |
| Blasting | Wire mesh belt BSfrom above and below simultaneously | Trough belt MGparts tumble in the rubber trough belt |
| Turbines | Wire mesh belt BS4 or 8 | Trough belt MG1 or 2 |
| Typical task | Wire mesh belt BSdeburring, descaling, cleaning | Trough belt MGdescaling, derusting, deburring |
Sources: AGTOS product pages for wire mesh belt and trough belt blast machines.
04 · Buying guide
Checklist for used AGTOS blast machines
A wheel blast machine wears wherever abrasive strikes. Clarify these points before you buy, or check them on site.
- Turbine type and drive
Find out whether 3.6 turbines (motors up to 22 kW) or 4.6 turbines (18.5–37 kW) are fitted, how many, and what motor power the rating plates show. AGTOS rates the 4.6 for coarse abrasive up to 3.5 mm and for fettling castings.
- Blades, impeller, control cage
The six plug-in blades per turbine, the impeller and the control cage are the main wear parts. Ask when they were last changed and whether standard or carbide parts are fitted; AGTOS states carbide lasts up to ten times longer.
- Turbine housing and liners
The housing is manganese steel with replaceable liner plates. Have the cover opened and inspect liners and housing walls for holes and wash-out.
- Cabinet, seals and curtains
Check the wear plates in the blast chamber, the rubber curtains at entry and exit, and doors and seals. Abrasive escaping from the machine points to worn seals.
- Abrasive recycling
Inspect bucket elevator, screw conveyors, separator, hopper and metering valves. On wire mesh belt machines, also test the trigger sill and the blow-off unit that return abrasive to the circuit.
- Filter and dust extraction
AGTOS fits cartridge filters with pulse-jet cleaning, using paper cartridges as standard and polyester fleece for fine dust. Check cartridge condition, cleaning, fan and secondary filter; if aluminium is blasted, clarify the explosion protection of the extraction separately.
- Conveyor system
Depending on type, check the wire mesh belt, rollers and drives, the rubber trough belt, or the hanger hooks, rotation drive and track. On hanger machines, compare the permitted hook load with your workpiece weights.
- Documentation and removal
Secure the rating plate, wiring diagrams, spare parts lists and turbine specification. Hanger and roller conveyor machines are often part of a linked line, so plan dismantling and transport early; see Relocation: dismantling and transport.
05 · Services
Services for used AGTOS blast machines
FISS supports the purchase and sale of used AGTOS blast machines: from choosing the right machine type through dismantling and transport to recommissioning at the new site.
Practical guide to relocation: Relocation: dismantling and transport
06 · FAQ
FAQ: used AGTOS blast machines
Does AGTOS still exist?
Yes. The former shareholders sold their shares with effect from December 2024 to the Japanese SINTOKOGIO group. The company has since traded as Sinto AGTOS GmbH, is still based in Emsdetten and manufactures in Konin, Poland. Trade press reports that management and staff remained unchanged.
What do the numbers in BS10-05 or HT17-23 mean?
They give the maximum workpiece width and height in decimetres. A BS10-05 takes parts up to 1,000 mm wide and 500 mm high; an HT17-23 takes workpieces up to 1,700 × 2,300 mm. In the MG trough belt range, the number is the batch volume in litres instead.
Which turbines does AGTOS use?
AGTOS designs its own blast wheel turbines. The 3.6 runs with motors up to 22 kW; the larger 4.6 runs at 18.5 to 37 kW with wheel diameters of 420, 440 or 460 mm. Both carry six plug-in blades, inserted from the centre and locked by a clamping disc.
Which AGTOS machine suits castings?
For flat castings and laser-cut parts in continuous flow, the BS wire mesh belt machine blasts from above and below. Large or bulky castings are better hung on an HT hanger machine with up to 2,000 kg hook load. Robust small parts in volume can be batch-blasted in an MG trough belt machine.
What wears fastest on an AGTOS blast machine?
Mainly the blades, impeller and control cage of the turbines, followed by housing liners, cabinet wear plates, curtains and filter cartridges. The rate depends on abrasive, workpiece and running hours, so maintenance records tell you more than the year of build.
Can I sell my AGTOS blast machine to FISS?
Yes. Send the type code, year of build, number of turbines and photos via the sell your machine form. FISS will review the details and get back to you with an assessment.
07 · Read more
More manufacturers and know-how in surface finishing
Contact
Looking for or selling an AGTOS blast machine?
Tell us the machine type, type code and the parts you blast. We will come back to you with suitable machines or an assessment of your AGTOS machine.
As of November 2026. Technical data based on public information from Sinto AGTOS GmbH (product and technology pages, company history) and trade press on the SINTOKOGIO acquisition; the rating plate and documents of each machine are authoritative. Sources:
- Sinto AGTOS: Unternehmen und Geschichte
- Foundry-Planet: Japanese Sintokogio takes over Emsdetten surface technology company Agtos (29.01.2025)
- Sinto AGTOS: Hochleistungsturbinen
- Sinto AGTOS: Drahtgurt-Strahlanlagen
- Sinto AGTOS: Rollenbahn-Strahlanlagen
- Sinto AGTOS: Hängebahn-Strahlanlagen
- Sinto AGTOS: Muldenband-Strahlanlagen
- Sinto AGTOS: Patronenfiltersysteme