to top

+49 (0) 7181 / 606 96-0

info@fiss-machines.com

Filter Filter
Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
2 From 24
NEW
Rauch
Year: 2005
Rauch MDO 250 magnesium dosing furnace, used O1620 Rauch MDO 250 magnesium dosing furnace, used O1620
Year: 2005, electrical heated with GMA gas mixing unit SO2, for cold chamber die casting.
Article-Number:
Article-Number: O1620
NEW
Rösler
Year: 2008
Rösler RHBE 9/13-L spinner hanger blast machine... Rösler RHBE 9/13-L spinner hanger blast machine SA2129, used
Year of construction: 2008, operating hours: 68547 h, incl. Rösler RF 350 NS filter system
Article-Number:
Article-Number: SA2129
NEW
KMU Loft
Year: 2008
KMU Loft PROWADEST 200/1 vacuum evaporator... KMU Loft PROWADEST 200/1 vacuum evaporator ZU2126, used
Year: 2008 (2016 completely overhauled), control system: Siemens S 7, for spray emulsion treatment
Article-Number:
Article-Number: ZU2126
NEW
ABB
Year: 2012
ABB IRB 6640 foundry robot HR1830, used ABB IRB 6640 foundry robot HR1830, used
Year: 2012, handling capacity 205 kg, reach 2,75 m, foundry design
Article-Number:
Article-Number: HR1830
NEW
ABB
Year: 2012
ABB IRB 6640 foundry robot HR1829, used ABB IRB 6640 foundry robot HR1829, used
Year: 2012, handling capacity 205 kg, reach 2,75 m, foundry design
Article-Number:
Article-Number: HR1829
NEW
Gerlieva
Year: 2002
Gerlieva GS 800/1000 Z spraying machine FS1735,... Gerlieva GS 800/1000 Z spraying machine FS1735, used
Year: 2001, for DCM range 300 - 400 t, function controled, without spraying tool and without lubrication container
Article-Number:
Article-Number: FS1735
NEW
IDRA
Year: 1993
IDRA OL 1350 PRP Clamar 2 cold chamber die... IDRA OL 1350 PRP Clamar 2 cold chamber die casting machine KK1567, used
Year of Manufacture: 1993, with one hydraulical tie bar removal, for aluminium die casting
Article-Number:
Article-Number: KK1567
NEW
Tecnopres
Year: 1996
Technopres KZP 30 NC trimming press EP1989, used Technopres KZP 30 NC trimming press EP1989, used
Year: 1996, pressing force 30 t, platen size: 1200 x 950 mm, distance between tie bars: 700 x 950 mm, ram stroke: 15 mm, incl. extraction slider
Article-Number:
Article-Number: EP1989
NEW
Müller Weingarten
Year: 1994
Müller Weingarten GDK 1600 cold chamber die... Müller Weingarten GDK 1600 cold chamber die casting machine KK1565, used
Year: 1994, incl. StrikoWestofen W 120 dosing furnace, Wollin PSM spraying machine, Resi SEP 11-65 trimming press and KMA suction hood, for aluminium die casting
Article-Number:
Article-Number: KK1565
Diesse
Year: 2011
Diesse T65 NG+ trimming press EP1988, used Diesse T65 NG+ trimming press EP1988, used
Year: 2011, pressing force 63t, control: Simatics 7, incl. moving table
Article-Number:
Article-Number: EP1988
Meltec
Year: 2015
Meltec IGC 250 ingot feeder for zinc ZU2122,... Meltec IGC 250 ingot feeder for zinc ZU2122, never used
Year: 2015, for zinc ingots
Article-Number:
Article-Number: ZU2122
Meltec
Year: 2013
Meltec IGC 250 ingot feeder for zinc ZU2121, used Meltec IGC 250 ingot feeder for zinc ZU2121, used
Year: 2013, for zinc ingots
Article-Number:
Article-Number: ZU2121
2 From 24

Used machines

We, at Fiss, are one of the leaders in buying, selling and mediating of used die casting machines. We have specialized in the distribution of used die casting machines of renowned manufacturers on the market. Benefit of our competent know-how and over 30 years of experience in the successful distribution of foundry machines and related peripherals devices. 

In many cases, the purchase of used foundry machines represents an economically attractive alternative to purchasing new systems.

We offer used machines in a very good price-performance-ratio, which are still reviewed on the fly by us in most cases. Your benefit is a real assessment of the state of the system under production conditions. Many photos and a detailed description of the used machines by our professional staff confirm this impression.

In the case of a partial or a complete overhaul of the selected machine we make you an individual offer. Insofar as it does not exist already, you can also request appropriate automation equipment and accessories for the selected system.

We offer you a comprehensive all-round-service, which for example includes the dismantling of the used system up to the handover in an operative state in your company.

Die casting machines

We offer hot and cold chamber die casting machines for the production of components made of metal with a low melting point. In this case the melt is pressed into the mould under high pressure and with faster flow rates.

The choice between hot chamber and cold chamber die casting machines is based on the actual melting point of the material.

Because our core competence lies in this area, we provide not only used machines, but also the retrofitting of automation equipment and foundry equipment according to the state of the art.

Gravity casting machines

Here you will find used gravity casting machines and low pressure die casting machines, in which the melt due to the gravity or at reduced pressure application enters the mould. We also offer appropriate accessories and modern machine controllers for the gravity casting machines as well.

Extrusion machines

We mediate used extrusion presses for the production of aluminium profiles. The continuous casting method is a quasi-continuous or continuous process in which strands emerge. These can serve as semi-finished products for further processing or as profiles.

Furnaces

We deal in a wide variety of furnace types for the remelting of non-ferrous metal alloys. Depending on the production process or the machine it involves melting-, holding- and dosing-furnaces, as they are commonly used in the foundry technology. To the respective furnaces, we also offer a wide range of feeding and dosing systems and conveyors for each melt.

Blasting facilities and barrel finishing machines 

For surface treatment after forming we offer used blasting facilities and barrel finishing machines. The selection of the suitable machine always depends on the requirements to the surface and the size of the finished parts. The used machines offered by us cover the complete spectrum of deburring and sand removal up to roughen the component surfaces.

Hydraulic and mechanical presses

For the machining of thin-walled metal parts we offer different presses. Hydraulic presses offer the advantage that they can generate very large forces and are versatile therefore. You will also find electric presses here that achieve a very high cycle number and have a cost-effective maintenance. For efficient processing of your metal parts we have different press lines in the range for you as well, which make several cutting and pressing operations when they get set one behind the other. That's how you can ensure that your device is optimally protected against cracking. 

We, at Fiss, are one of the leaders in buying, selling and mediating of used die casting machines. We have specialized in the distribution of used die casting machines of renowned manufacturers on... read more »
Close window
Used machines

We, at Fiss, are one of the leaders in buying, selling and mediating of used die casting machines. We have specialized in the distribution of used die casting machines of renowned manufacturers on the market. Benefit of our competent know-how and over 30 years of experience in the successful distribution of foundry machines and related peripherals devices. 

In many cases, the purchase of used foundry machines represents an economically attractive alternative to purchasing new systems.

We offer used machines in a very good price-performance-ratio, which are still reviewed on the fly by us in most cases. Your benefit is a real assessment of the state of the system under production conditions. Many photos and a detailed description of the used machines by our professional staff confirm this impression.

In the case of a partial or a complete overhaul of the selected machine we make you an individual offer. Insofar as it does not exist already, you can also request appropriate automation equipment and accessories for the selected system.

We offer you a comprehensive all-round-service, which for example includes the dismantling of the used system up to the handover in an operative state in your company.

Die casting machines

We offer hot and cold chamber die casting machines for the production of components made of metal with a low melting point. In this case the melt is pressed into the mould under high pressure and with faster flow rates.

The choice between hot chamber and cold chamber die casting machines is based on the actual melting point of the material.

Because our core competence lies in this area, we provide not only used machines, but also the retrofitting of automation equipment and foundry equipment according to the state of the art.

Gravity casting machines

Here you will find used gravity casting machines and low pressure die casting machines, in which the melt due to the gravity or at reduced pressure application enters the mould. We also offer appropriate accessories and modern machine controllers for the gravity casting machines as well.

Extrusion machines

We mediate used extrusion presses for the production of aluminium profiles. The continuous casting method is a quasi-continuous or continuous process in which strands emerge. These can serve as semi-finished products for further processing or as profiles.

Furnaces

We deal in a wide variety of furnace types for the remelting of non-ferrous metal alloys. Depending on the production process or the machine it involves melting-, holding- and dosing-furnaces, as they are commonly used in the foundry technology. To the respective furnaces, we also offer a wide range of feeding and dosing systems and conveyors for each melt.

Blasting facilities and barrel finishing machines 

For surface treatment after forming we offer used blasting facilities and barrel finishing machines. The selection of the suitable machine always depends on the requirements to the surface and the size of the finished parts. The used machines offered by us cover the complete spectrum of deburring and sand removal up to roughen the component surfaces.

Hydraulic and mechanical presses

For the machining of thin-walled metal parts we offer different presses. Hydraulic presses offer the advantage that they can generate very large forces and are versatile therefore. You will also find electric presses here that achieve a very high cycle number and have a cost-effective maintenance. For efficient processing of your metal parts we have different press lines in the range for you as well, which make several cutting and pressing operations when they get set one behind the other. That's how you can ensure that your device is optimally protected against cracking. 

recently viewed